::Crown Group Trading & Const Co::

Products & Services :: Grades of Bitumen

BITUMEN PAINT (SOLVENT BASE)

Bitumen PAINT (SOLVENT Base) is a solvent based cold applied water proofing paint formulated with petroleum solvent.

The Bitumen Residue of this paint will meet the requirement of ASTM D-449 Type ll

This is most suitable for the waterproofing of Under ground concrete foundation Base payment spouts and Gutters.

Bitumen Paint performance meets the Requirement of ASTM D 4479

APPLICABLE STANDARD

ANALYSIS	VALUE	METHOD
DENSITY @ 25 C^O KG/L	0.94-0.96	ASTM D 70
FLASH POINT	60C^O	ASTM D 93
RESSISTANCE TO UV RAYS	NIL	ASTM G 53
COLD FLEXIBILITY @ -20 C^O	NIL	ASTM D 4479
ELONGATION OF CURED FILM	350 %	LAB METHOD
HEAT RESSISTANCE @ 60 C^O	No sagging	ASTM D 4479
RESSISRANCE TO SALT	Excellent	LAB METHOD

Packing: 20 l Pails, 200 l Drums

Storage: Reseal containers after use. Use in ventilated area ,avoid inhaling fumes and do not smoke or permit naked flame where stored or use. Stir before using.

Storage life : Varies with climatic conditions. But it's usually in one year. Keep out of direct sunlight.

Health and Safety Instruction: Avoid contact with skin, mouth, eyes and food stuffs. In case of emergency, seek qualified medical attention .Keep away from children and from pets.

CROWN products are tested by independent laboratories at random intervals and the test results are available on request.